tp-link Universal Wi-Fi Range Extender Installation Guide – Manuals+

tp-link Universal Wi-Fi Range Extender

tp-link Universal Wi-Fi Range Extender Installation Guide

hypertext transfer protocol : //www.tp-link.com/download/TL-WA850RE.html

Power On

Plug the extender into a baron release next to your router. Wait until its Power LED turns upstanding on .

Set Up

Via the Tether App

1. Get the up-to-date Tether app from the Apple App Store or Google Play, or simply scan the QR code.
2. Launch the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first. 
3. Tap the + button and select Range Extender.  Note: If you cannot find your device, please refer to FAQ > Q1.
4. Follow app instructions to complete the setup. The RE LED should turn solid on, indicating successful connection to your router.
   Note: If the LED does not turn solid on, please refer to FAQ > Q2.

More Setup Methods

Via a Web Browser:

1. Connect your computer or smartphone to the extender’s network TP-Link_Extender.
2. Visit http://tplinkrepeater.net or http://192.168.0.254 in a web browser. Create a password to log in.
3. Follow web instructions to complete the setup.

Via the WPS Button:

1. Press the WPS button on your router.
2. Within 2 minutes, press the WPS button on the extender for 1 second. The RE LED should change from blinking to solid on, indicating successful connection.

Extended Network Name:
Router ’ second network name with _EXT at the end
For more details, please refer to the user guide at: hypertext transfer protocol : //www.tp-link.com/support/download/ .

Relocate

1. Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until 3 or more LEDs light up. If not, relocate the extender closer to the router to achieve better signal quality.

Tip : For more intuitive location aid, entree extender settings via the Tether app and go to Tools > Location Assistant .

Enjoy!

Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the internet. The password of your extend network is the like as your host router. Tip : You can besides set up the extender in Access Point mode to transform your existing wired network to a wireless one. For details, refer to the user steer at hypertext transfer protocol : //www.tp-link.com/support/download/ .

Access Extender Settings

After setup, you can access extender settings via any of the methods below. You can reselect horde network, change extended network settings and more. Note : If your extender and router use the same network name, Method 1 is recommended. Method 1: Via the Tether App

1. Connect your smartphone to the extender`s or router’s network.
2. Launch the Tether app, select your extender, and log in.
3. View or change extender settings as needed.

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network. If you are using a computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and log in.
3. View or change extender settings as needed.

LED Explanation

Other top tp-link manual’s:

FAQ (Frequently Asked Question)

Q1. What should I do if the Tether app cannot find my device during setup?
Try another method acting by following the steps below :

1. Connect your smartphone to the extender’s network TP-Link_Extender.
2. Launch the Tether app, and select your extender.
   Tip: If you have connected to the extender’s Wi-Fi but still cannot find your device, try turning off your cellular data.
3. Follow app instructions to complete the setup. If you are still having problems, contact our technical support.

Q2. What should I do if the RE LED doesn’t turn solid on after completing setup via the Tether app or web browser?

• You may have entered incorrect Wi-Fi password for your host router during the configuration. Check the password and try again.
• Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
• If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
• Try setting it up via the WPS button.
• Reset the extender and go through the configuration again.

If you are inactive having problems, contact our technical foul support. Q3. How do I reset the extender?

• With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above condom data when operating the device. We can not guarantee that no accidents or damage will occur due to improper use of the device. Please use this merchandise with care and operate on at your own risk. TP-Link hereby declares that the device is in submission with the necessity requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and ( EU ) 2015/863. The original EU contract of conformity may be found at hypertext transfer protocol : //www.tp-link.com/en/ce. To communicate with TP-Link users or engineers, please join the TP-Link Community at hypertext transfer protocol : //community.tp-link.com.
If you have any suggestions or needs for our merchandise guides, you are welcome to email [ electronic mail protected ].
For technical foul support, the user lead and other data, please visit hypertext transfer protocol : //www.tp-link.com/support/, or merely scan the QR code.

tp-link Universal Wi-Fi Range Extender Installation Guide
Click to Read More tp-link Manuals

Documents / Resources

References

reference : https://meopari.com
Category : How To